2009 Toyota Camry Headlight Bulbs & Lighting Guide
Confirmed bulb sizes for the common factory-halogen setup, followed by upgrade picks based on products BulbFacts physically tested in real headlight housings.
Source-listed fitment data supplied by CarBulbGuide. Confirm the installed bulbs and configuration before ordering.
Low beam
H11
High beam
9005 / HB3
Factory setup
Halogen Projector
Best headlight upgrades
These products were physically tested by BulbFacts, but the tests were not performed in this exact vehicle unless a card explicitly says otherwise.
Halogen Projector
Low beam: H11 · High beam: 9005 / HB3
Best direct replacement
OSRAM Night Breaker 200
Low beam H11 · High beam 9005 / HB3
Estimated price$20-34
Editorial pickCorrect bulb size
Best Standard Reflector Upgrade
Our practical one-product-family starting point for this setup. It tested above the standard reference and is sold in both Camry headlight sizes.
For drivers prioritizing maximum tested projector output. Check cooling-hardware clearance, heat, beam pattern, and headlight aim before deciding on a conversion.
A premium distance-focused HID option from the BulbFacts projector tests. Check ballast mounting, wiring, weather sealing, beam pattern, and local rules before converting.
Cloudy, yellowed, or oxidized outer lenses can block useful light even when the bulbs are performing properly. Restore and protect a recoverable lens before replacing an otherwise healthy headlight assembly.
A matching bulb size identifies fitment; it does not by itself prove optical compatibility or make a conversion a vehicle-specific recommendation. Use the LED upgrade path only with a reflector housing and confirm beam pattern and glare after installation. Use the HID upgrade path only with a projector housing; it is not a reflector-housing recommendation.
Other bulbs
Available exterior and interior lighting data for this model year.
Confirm the installed bulb, connector, housing, and factory system before ordering.
Cross-checked against current retailer fitment and 2009 owner-manual references.
Prior headlight-assembly swaps and market differences can change the installed configuration.
Position
Bulb or system
Fitment status
Low beam
H11
Fitment confirmed
High beam
9005 / HB3
Fitment confirmed
Other Toyota Camry years
Each model year opens its own BulbFacts record. Bulb sizes and factory systems are not carried over from adjacent years.
Fitment note: Verify the installed bulb, connector, housing, and factory system before ordering. A bulb-size match is not automatically a conversion recommendation or proof of vehicle-specific testing.
